Your pc showing wrong date & time so many times you set the date and time but never show correct date & time?

 The Basic problem with the system it is showing wrong date & time. It shows COMS setting wrong. Than change you’re COMS.

Here I am changing COMS.

 

Now I am Insert new CMO’S.

 

 

If your pc is NOT starting even power button also not starting?

Then remove your power cable check it out. It in 3pins then test your power cable with tester. It will indicate the light in 3pins means your power cable is loss. Please change it.in it indicate the light in 1pin then its ok .please reconnect it and restart.

 If your pc is start and immediately within seconds it will turned off?

Its means your SMPS damaged pleaces replace the SMPS
Here it is the SMPS
Remove all power cable wires related to board &SMPS. 

Take new SMPS connect all cables then connect power cable wire

Your pc is starting, newer shows windows screen and it giving beep sounds?

Then shut down the pc. Remove the RAM and clean it and reinsert if again it’s giving beep sounds you have to change your RAM.
2 sides lock open after remove.

Before inserting New RAM first check your RAM is SD, DDR1, DDR2 or DDR3.It is mentioned on the mother board.